Measuring tool vernier caliper

1.accuracy: 0.02mm 2.different measuring range 3.material: carbon steel 4.packing:plastic box or wooden box

                               

Measuring tool vernier caliper

     Vernier calipers are used for more accurate measuring than can be achieved with a measuring rule or a slide caliper. It is capable of measuring internal and external dimensions and can also be used as a depth gauge. Vernier calipers are available with metric and imperial graduations.

 Features:1.three ways measuring:  internal diameter,outside diameter, and depth

2.Made of carbon steel.3.High accuracy and safe operation.1. External jaw2. Internal jaw3. Sliding jaw4. Metric vernier scale5. Locking screw6. Main scale7. Depth gauge How to use a vernier caliperAn ordinary vernier caliperhas jaws you can place around an object, and on the other side jaws made to fit inside an object. These secondary jaws are for measuring the inside diameter of an object. Also, a stiff bar extends from the caliper as you open it that can be used to measure depth.

The basic steps are as follows:1. Preparation to take the measurement, loosen the locking screw and move the slider to check if the vernier scale works properly. Before measuring, do make sure the caliper reads 0 when fully closed. If the reading is not 0, adjust the caliper’s jaws until you get a 0 reading. If you can’t adjust the caliper, you will have to remember to add to subtract the correct offset from your final reading. Clean the measuring surfaces of both vernier caliper and the object, then you can take the measurement.

2. Close the jaws lightly on the item which you want to measure. If you are measuring something round, be sure the axis of the part is perpendicular to the caliper. Namely, make sure you are measuring the full diameter. An ordinary caliper has jaws you can place around an object, and on the other side jaws made to fit inside an object. These secondary jaws are for measuring the inside diameter of an object. Also, a stiff bar extends from the caliper as you open it that can be used to measure depth.

 

 

 

 

plastic box:

 

Measuring tool vernier caliper